Translucent Self Adhesive Laser Film
-
Product type: Stabilised Self Adhesive Polyester Laser Film
-
Surface finish: Matt coating
-
Thickness: 36µ face film/75µ release
- Appearance: Translucent
Features: Ideal for patching to architectural drawings, as "matt clear" labels and many other copier and laser printer applications. Stays flat with polyester release. Standard acrylic adhesive.
Suitable for: Large format PPC machines, mono/colour copiers and laser printers.
When printing Polyesters by laser or copier methods the thick paper or film settings and recommended feed trays should be used where available. If print is attempted using normal 80gsm copier paper settings (particularly on high speed machines i.e. greater than 10ppm) it is likely that the material may jam as it is feeding too fast for its material type and the toner may not fuse correctly. Refer to the printer manual for settings for film products.
NOTICE The information provided herein is correct to the best of our knowledge. No liability for any errors, facts or opinions is accepted. You must satisfy yourself as to the suitability of this product for your application. No responsibility for any loss as a result of any person placing reliance on any material contained herein can be accepted.
Please contact us for all Enquiries
Supplyline 2A Hemnall Street, Epping, Essex CM16 4LW
