-
Product type: Stabilised Polyester Laser Film
-
Surface finish: Matt coating both sides
-
Thickness: Base thickness 75 microns, overall 95 microns
-
Weight: 120gsm
- Appearance: White
Features: Hydrocopy White has a smooth surface based on an environmentally friendly aqueous coating giving a strong dense image. It is waterproof, greaseproof, wipeable and punchable. Ideal for presentations and signs - no protection necessary! It can also be used to create technical manuals or documents for use in harsh environments.
Suitable for: Mono copiers and laser printers. For colour, we recommend F100TPD
When printing Polyesters by laser or copier methods the thick paper or film settings and feed trays should be used where available. If print is attempted using normal 80gsm copier paper settings (particularly on high speed machines i.e. greater than 10ppm) it is likely that the material may jam as it is feeding too fast for its material type and the toner may not fuse correctly. Refer to the printer manual for settings for film products.
NOTICE The information provided herein is correct to the best of our knowledge. No liability for any errors, facts or opinions is accepted. You must satisfy yourself as to the suitability of this product for your application. No responsibility for any loss as a result of any person placing reliance on any material contained herein can be accepted.
Please contact us for all Enquiries
Supplyline 2A Hemnall Street, Epping, Essex CM16 4LW
