Hydroprint White Cling Film
-
Product type: White Polyester Cling Film for Colour Laser, Screen and Thermal Transfer print processes
-
Surface finish: Matt coating
-
Thickness: 60 microns with 75 micron release film
- Weight: 195gsm total construction
- Appearance: White with semi-opaque release
- Operating Temperature: Down to -7degC
Features: Matt white film to create point-of-sale displays and removable stickers. After removal of release film (assisted by the back-slits on A4 and US Letter sizes only), the cling surface sticks to glass, gloss paint, metal or any smooth dry surface. There is no adhesive residue and it can be repositioned easily. [Caution: Some laminates such as Formica may cause the cling surface to behave like a permanent adhesive after time]
If the cling adhesive gets dirty/dusty it can be cleaned with cold tap water and when allowed to dry, will be reusable.
Suitable for: Most Colour/Mono Laser printers and modern Copiers.
The printable surface is also suitable for screen print, offset litho (using fully oxidising inks) and thermal transfer.
Availability: Widths up to: 914mm (36 inches)
Conditions of Use and Stocking
Environmental limits - Storage & Transport: 10°C - 30°C , 10% - 80% RH.
Print Operating limits – Material Use: 10°C - 30°C , 10% - 80% RH (optimal usage conditions: 30% - 70% RH).
Product Shelf life: 18+ months from date of purchase.
NOTICE The information provided herein is correct to the best of our knowledge. No liability for any errors, facts or opinions is accepted. You must satisfy yourself as to the suitability of this product for your application. No responsibility for any loss as a result of any person placing reliance on any material contained herein can be accepted.
Please contact us for all Enquiries
Supplyline 2A Hemnall Street, Epping, Essex CM16 4LW
